- Contact: Felipe Iglesias
- Title: Business Development Director
- Team Languages: English, Japanese, Portuguese, Spanish, French, Chinese and Cantonese.
- E-mail: [email protected]
- Tel / WhatsApp: +86 13126536955
How do you reach the sales contact?
The sales contact is Felipe Iglesias, Business Development, reachable directly by email at [email protected] or by phone at +86 13126536955. There is no web form between you and the answer — your message goes straight to a person who can read a drawing, answer a tolerance question and arrange an audit, not a ticket queue.
Direct contact matters because a quote and an audit are both technical conversations, not data-entry tasks. When you email a drawing, the reply comes back with a design-for-manufacturing review that flags what is expensive and what is hard to hold, rather than an automated price, and the same channel sets up the walkthrough or in-person audit.
What should you include in your first message?
The more complete the first message, the faster and more accurate the quote, and the sooner the audit checklist arrives. Include the five things that determine a machining quote, and state whether you also want to audit.
- The 3D model or drawing — STEP or IGES preferred, plus a toleranced 2D drawing for the critical dimensions.
- The material and grade — for example 6061-T6 or 316L, rather than just "aluminum".
- The quantity — prototype count and, if known, the production volume you are heading toward.
- Any finish or heat treatment — anodizing, plating, powder coating or heat treatment, since these change cost and lead time.
- Your target date, so the quote can state honestly whether the lead time holds.
If you want to audit, say so in the same message and the document checklist — machine list, calibration records, SPC/CMM evidence and certificate numbers — is provided up front, with a video walkthrough or an in-person visit scheduled on request.
Which languages can you communicate in?
The sales team works in English, Japanese, Portuguese, Spanish and French. The primary contact, Felipe Iglesias, communicates in English, Portuguese, Spanish, French, and Chinese; Japanese is handled by Anna Tian, our Japan market leads. Write in whichever of these you are most precise in — a technical conversation is clearer in your first language, and the numbers carry the meaning.
| Language | Covered by |
|---|---|
| English | Felipe Iglesias (full professional) |
| Portuguese | Felipe Iglesias (native) |
| Spanish | Felipe Iglesias |
| French | Felipe Iglesias |
| Japanese | Team colleagues |
Where is the factory, and how do you reach it?
The factory is at No. 8, Shuibian Songyuan Road, Hengli Town, Dongguan, Guangdong, China 523470. Dongguan sits in the Pearl River Delta, about an hour from Shenzhen Bao'an International Airport, so an in-person audit is straightforward for buyers already in southern China.
Get directions to our Dongguan plant
For buyers who want to see the floor before ordering, a live video walkthrough is available on request — machines running, the inspection area, and the material verification at the door — so the first visit needs no plane ticket. Ask for the walkthrough or the audit in the same email as your drawing, and both are arranged together.
What happens after you send a drawing?
Your drawing goes to an engineer, not a sales script. The reply — usually within one business day — is a design-for-manufacturing review and a quote. The DFM review is the useful part: it flags features that are hard to hold, tolerances that are tighter than the part needs, and any change that would cut cost or lead time, before any metal is cut.
This is the difference between a factory and a price list, and it is the same discipline as the audit. A price list quotes what you drew; a DFM review tells you what the drawing will actually cost to make and whether a small change saves real money. That conversation happens before you commit, not after the parts ship.
How do you protect drawings you have not shared yet?
If your drawing is proprietary, protection is arranged before you send it. Customer IP is handled as standard — paper documents in an access-controlled secure space, electronic data on encrypted drives — and a confidentiality agreement can be put in place first if your program requires one.
Ask for the NDA in your first message and the agreement is set up before any file changes hands. You should never have to choose between getting a quote and keeping a drawing confidential; both can be arranged in the same exchange, and the IP protection is itself an item an auditor checks.
Why is there no web form on this page?
Deliberately. A web form sits between you and the person who can answer, and a form that is not wired to a real inbox is worse than none at all — your inquiry disappears and you never find out. Direct email and phone mean your message reaches a named person who can read a drawing, answer a tolerance question and arrange an audit, with substance rather than an autoresponder.
If you prefer a scheduled call or a video walkthrough instead of email, say so in the message and it is arranged. The channel matters less than the outcome: a quote with a DFM review, from a person who can answer your tolerance and audit questions directly.
What this shop actually runs
A buyer asking for capability evidence should get a specific answer. The facility behind this guide operates 100+ CNC machines across a 6,800 m2 plant in Dongguan, China, with 100+ staff. The machine list by category:
- 5-axis machining centres (10+) - Mazak VARIAXIS I-600 (510/910/510 mm travel, 12,000 rpm, 22 kW, 71.6 N·m, 30-tool BT40) and Mazak INTEGREX I-250H S (B-axis 0.0001°, 24 kW, 124 N·m, 38-tool HSK-A63). Cut on compound-angle parts, single-setup multi-face prismatic work, and aerospace fittings where datum transfer loss is unacceptable.
- 3-axis / 4-axis machining centres (50+) - Brother SPEEDIO S500Z2N / S700Z2N (10,000 rpm, 14/21-tool ATC, 0.7 s tool-to-tool, Z-axis 2.2 G) and Mazak VCE-430A L / VCE-570C L (10,000 rpm, 118 N·m, 24-tool ATC). Cut on prismatic parts, plates, brackets, housings.
- Swiss-type turning centres (10+) - Citizen Cincom A20-3F7 (Φ20 mm, 10,000 rpm), TSUGAMI B0206-III / B0205-III (Φ20 mm, 0.1 µm), STAR SR-32JII / SR-32J Type N (Φ32 mm, 8,000 rpm). Cut on long, slender rotational parts at ±0.002 mm.
- CNC turning centres (20+) - HEADMAN T70M/1250 (720 mm swing, 117 mm bore, 3,000 rpm, BMT75 12-station turret). Cut on shafts, bushings, flanges up to ±0.002 mm.
- Wire EDM (5+) - Sodick AQ535L (550/350/300 mm travel, ±20° taper, 800 kg workpiece). Cut on hardened tool steel, internal splines, sharp internal corners that milling cannot reach.
- Inspection: Hexagon CMM + 20+ gauges - Hexagon CMM for coordinate measurement, plus vision system, profilometer, hardness tester, coating thickness gauge, XRF for material verification. The 10:1 rule (gauge 10x more accurate than the band) is applied to every feature.
- Machine highlights - VARIAXIS I-600: one-setup multi-face 5-axis + MAZA-CHECK auto-calibration; INTEGREX I-250H S: DONE-IN-ONE mill-turn, B-axis 0.0001° + Ai thermal shield; SPEEDIO S500Z2N / S700Z2N: Z-axis 2.2 G + 0.7 s ATC; Swiss-type: guide-bush switchable + 0.1 µm resolution.
Tolerance bands held: ±0.003 mm on CNC milling, ±0.002 mm on CNC turning, ±0.002 mm on precision grinding and wire EDM. Capability indices: Ppk >= 1.67 initial on key characteristics; Cpk >= 1.33 ongoing in production.
Certifications: ISO 9001:2015 (116024/A/0001/UK/En), IATF 16949:2016 (131941/A/0001/SM/En, design clause 8.3 excluded - disclosed openly), ISO 14001:2015 (116024/B/0001/UK/En). Certificates are issued to Dongguan Zhuohang Ltd (USCC 91441900MA4UWT6X39, established 2005).
Service area: Austria, Belgium, the Czech Republic, Denmark, France, Germany, Greece, Hungary, Ireland, Italy, the Netherlands, Spain, Sweden and the United Kingdom in Europe; Brazil, Canada, Mexico and the United States in the Americas; China, Israel, Japan, Singapore and Sri Lanka in Asia; Australia and New Zealand in Oceania; and South Africa in Africa. Based in China, serving customers worldwide.
Contact: Felipe Iglesias, [email protected], +86 13126536955.
Send your drawing, or request the factory audit
Email [email protected] or call +86 13126536955 — DFM review, quote or walkthrough, usually within one business day.
Frequently Asked Questions
How do I contact the machining factory for a quote or audit?
In short, Email [email protected] or call +86 13126536955. Send your STEP, IGES or 2D drawing and you receive a design-for-manufacturing review and a quote, usually within one business day.
What should I include in my first message?
In short, Include the 3D model or drawing, the material and grade, the quantity, any surface finish or heat treatment, and your target date. If you also want to audit, request the document checklist or a walkthrough in the same message.
Which languages can you communicate in?
In short, English, Portuguese, Spanish, French, and Chinese are available through the sales team, with Japanese handled by Anna Tian, our Japan market leads. The primary contact, Felipe Iglesias, works in English, Portuguese, Spanish, French, and Chinese, so a technical conversation can happen in whichever of these you are most precise in.
How quickly do you respond?
In short, A quote with a design-for-manufacturing review is returned usually within one business day. Any issue that would raise cost or lead time — including tolerances tighter than the part needs — is flagged at that stage, before you commit, rather than discovered after the parts are cut.
Where is the factory located?
At No. 8, Shuibian Songyuan Road, Hengli Town, Dongguan, Guangdong, China 523470, about an hour from Shenzhen Bao'an International Airport. A live video walkthrough of the floor is available on request before you place an order or travel.
Do you provide an NDA before I share a drawing?
In short, Customer IP is protected as standard: paper documents are stored in an access-controlled secure space and electronic data on encrypted drives. A confidentiality agreement can be arranged before drawings are shared if your program requires one, so you never have to choose between a quote and confidentiality.
Standards referenced on this page
- ASTM B211/B211M-19 — Standard Specification for Aluminum-Alloy Rolled or Cold Finished Bar, Rod, and Wire
- ASTM A582/A582M-12 — Standard Specification for Free-Machining Stainless Steel Bars
- ISO 9001 — Quality management systems — Requirements
