Zhuohang Precision Machining Factory

Machining FAQs

Zhuohang MES production management dashboard, Dongguan, China

Machining FAQs — The questions buyers ask before auditing or ordering from a machining factory — the audit checklist, MOQ, tolerances,. Tolerances: ±0.003 mm milling, ±0.002 mm turning — ISO 9001 / IATF 16949 verified.

The questions buyers ask before auditing or ordering from a machining factory — the audit checklist, MOQ, tolerances, materials, lead times, certifications, traceability and how to request a walkthrough — answered directly, with the numbers you can verify.

Quick answers
  • Audit checklist: machine list, calibration, SPC/CMM, cert numbers, PPAP, finishing owner.
  • MOQ: 1 piece. Lead time: ~3 / 7 / 30 days by complexity.
  • Tolerances: ±0.003 mm milling / ±0.002 mm turning, ±0.002 mm grinding, Ppk ≥ 1.67 initial.
  • Walkthrough: email [email protected] — live video or in-person audit on request.

What is the supplier audit checklist for a machining factory?

Request six documents before visiting: the machine list with model names and counts, calibration records, an SPC or CMM report from a real job, certificate numbers with registrar and scope, a sample PPAP or control plan, and a named owner of secondary operations. Then match each to the floor during a walkthrough. A real factory produces them on request; a trading desk cannot.

What is the minimum order quantity for machining?

The MOQ is 1 piece. Prototype and single-part orders are accepted alongside production runs, so you can audit a first article before committing to volume. Batch size is a decision you make, not a floor imposed on you, and it changes how setup cost is spread across the order.

What tolerances can this machining factory hold?

±0.003 mm on CNC milling, ±0.002 mm on CNC turning, and ±0.002 mm for precision grinding. Critical dimensions are verified on in-house Hexagon CMMs, with process capability Ppk ≥ 1.67 at the initial study on key characteristics and Cpk ≥ 1.33 on general characteristics — backed by a measured Ppk ≥ 1.67 at the initial study on key characteristics on a real job.

Read the tolerance band before you read the index. Cpk is a ratio of the tolerance band to the process spread, not an absolute measure of accuracy. The figure above was recorded on a length characteristic with a 0.4 mm band (76.1–76.5 mm) — wide by design. Hold the same process spread against a ±0.005 mm feature and it fails outright. Ask for the band, the subgroup count and the sampling window on every capability number a supplier quotes.

Which materials does the factory machine?

Aluminum, stainless steel, carbon and alloy steel, brass, copper, titanium, magnesium and engineering plastics including ABS, POM, nylon, PTFE and PEEK. Every incoming lot is XRF-checked against the mill certificate so the alloy you specify is the alloy you receive, not a near-match.

What are the lead times?

Roughly 3, 7 or 30 days depending on part complexity and the number of process steps. Simple parts ship in about 3 days, while parts with surface finishing or many operations fall into the longer 30-day tier. Complex parts can run 10–20 process steps, and finishing pushes a part into the longer tier.

Are the certifications verifiable with the registrar?

Yes — ISO 9001:2015 (116024/A/0001/UK/En), IATF 16949:2016 (131941/A/0001/SM/En) and ISO 14001:2015 (116024/B/0001/UK/En), all issued by URS. IATF 16949 scope excludes product design under Clause 8.3, so this is a build-to-print operation.

How is incoming material verified?

Every incoming lot is checked by XRF against its mill certificate before it reaches a machine, so mixed or mislabeled alloy is caught at the door. This prevents the most expensive defect in machining: a perfectly machined part made from the wrong material, which stays silent until it fails in your assembly.

Can parts be traced back to the raw material?

Yes. The MES/ERP system records the full chain on every lot: raw material source and usage, process parameters, machine data, production batch, machining time, operator and inspection results. If a non-conformance surfaces, the factory can name the lot, machine and operator rather than guess.

Which machining services are run in-house?

Four core processes: CNC milling (3-, 4- and 5-axis), CNC turning, mill-turn and precision grinding. Keeping the metal-cutting chain under one roof means one accountable supplier for the tolerance-critical work, with secondary finishing bundled through named, qualified partners.

What documentation ships with the parts?

CMM inspection reports, SPC control charts and material certificates ship with the parts. Every critical dimension carries a measured value rather than a pass/fail flag, so your own incoming inspection has a documented baseline to check against — the same evidence you request before ordering is delivered with it.

Can secondary operations be bundled?

Yes — anodizing, plating, powder coating, painting, brushing, polishing and heat treatment can be bundled so you receive finished parts, not machined blanks. In-house ovens reach 500 °C for aluminum and low-temperature steel stress relief; titanium stress relief above that is outsourced and stated as such.

How do I request a factory audit or walkthrough?

Email [email protected] or call +86 13126536955. A live video walkthrough of the floor is available on request, and an in-person audit can be scheduled for buyers visiting southern China. The document checklist is provided up front, and the address is No. 8, Shuibian Songyuan Road, Hengli Town, Dongguan 523470.

A question not covered here? Email [email protected] — a direct answer, usually within one business day, with the document or measurement behind it rather than a canned reply.

Which materials and industries do you cover?

We machine aluminum, stainless steel, titanium, brass, copper, and Inconel, plus engineering plastics including PEEK and Delrin. These materials are used in medical, aerospace, automotive, robotics, electronics and defense applications, with the inspection, traceability and documentation each sector requires before it places an order.

What buyers ask most

Three questions come up on nearly every enquiry. What is the minimum order? One piece - a single prototype can be machined, checked and iterated before any volume is committed. What is the lead time? Roughly 3 / 7 / 30 days depending on the material and the documentation scope, from a simple aluminium part to a full first-article package. What tolerances can you hold? ±0.003 mm milled and ±0.002 mm turned, verified on a Hexagon CMM, with Ppk 1.67 or better initial and Cpk 1.33 or better in production on critical characteristics. The answers are short because the capability is specific, not vague.

The answers behind the answers

The plant behind these answers is Dongguan Zhuohang Ltd - 6,800 m² in Hengli Town, Dongguan, 100+ CNC machines including Mazak VARIAXIS I-600 and INTEGREX I-250H S, and certification to ISO 9001:2015, IATF 16949:2016 and ISO 14001:2015 with the certificate numbers published and verifiable. The service area covers Austria, Belgium, the Czech Republic, Denmark, France, Germany, Greece, Hungary, Ireland, Italy, the Netherlands, Spain, Sweden and the United Kingdom in Europe; Brazil, Canada, Mexico and the United States in the Americas; China, Israel, Japan, Singapore and Sri Lanka in Asia; Australia and New Zealand in Oceania; and South Africa in Africa, with worldwide shipping from Dongguan. Contact Felipe Iglesias at [email protected] or +86 13126536955 with a drawing and a quantity for a specific answer to your specific part.

What this shop actually runs

We machine every part in our own 6,800 m² plant in Dongguan, China, on 100+ CNC machines with 100+ staff. The machine list by category:

  • 5-axis machining centres (10+) - Mazak VARIAXIS I-600 (510/910/510 mm travel, 12,000 rpm, 22 kW, 71.6 N·m, 30-tool BT40) and Mazak INTEGREX I-250H S (B-axis 0.0001°, 24 kW, 124 N·m, 38-tool HSK-A63). Cut on compound-angle parts, single-setup multi-face prismatic work, and aerospace fittings where datum transfer loss is unacceptable.
  • 3-axis / 4-axis machining centres (50+) - Brother SPEEDIO S500Z2N / S700Z2N (10,000 rpm, 14/21-tool ATC, 0.7 s tool-to-tool, Z-axis 2.2 G) and Mazak VCE-430A L / VCE-570C L (10,000 rpm, 118 N·m, 24-tool ATC). Cut on prismatic parts, plates, brackets, housings.
  • Swiss-type turning centres (10+) - Citizen Cincom A20-3F7 (Φ20 mm, 10,000 rpm), TSUGAMI B0206-III / B0205-III (Φ20 mm, 0.1 µm), STAR SR-32JII / SR-32J Type N (Φ32 mm, 8,000 rpm). Cut on long, slender rotational parts at ±0.002 mm.
  • CNC turning centres (20+) - HEADMAN T70M/1250 (720 mm swing, 117 mm bore, 3,000 rpm, BMT75 12-station turret). Cut on shafts, bushings, flanges up to ±0.002 mm.
  • Wire EDM (5+) - Sodick AQ535L (550/350/300 mm travel, ±20° taper, 800 kg workpiece). Cut on hardened tool steel, internal splines, sharp internal corners that milling cannot reach.
  • Inspection: Hexagon CMM + 20+ gauges - Hexagon CMM for coordinate measurement, plus vision system, profilometer, hardness tester, coating thickness gauge, XRF for material verification. The 10:1 rule (gauge 10x more accurate than the band) is applied to every feature.
  • Machine highlights - VARIAXIS I-600: one-setup multi-face 5-axis + MAZA-CHECK auto-calibration; INTEGREX I-250H S: DONE-IN-ONE mill-turn, B-axis 0.0001° + Ai thermal shield; SPEEDIO S500Z2N / S700Z2N: Z-axis 2.2 G + 0.7 s ATC; Swiss-type: guide-bush switchable + 0.1 µm resolution.

Tolerance: ±0.003 mm CNC milling / ±0.002 mm CNC turning / ±0.002 mm grinding and wire EDM. Capability: Ppk >= 1.67 initial on key characteristics, Cpk >= 1.33 ongoing.

Certificates: ISO 9001:2015 (116024/A/0001/UK/En), IATF 16949:2016 (131941/A/0001/SM/En, with design clause 8.3 excluded, stated openly) and ISO 14001:2015 (116024/B/0001/UK/En), issued to Dongguan Zhuohang Ltd, registration 91441900MA4UWT6X39, founded 2005.

Where we ship: Austria, Belgium, the Czech Republic, Denmark, France, Germany, Greece, Hungary, Ireland, Italy, the Netherlands, Spain, Sweden and the United Kingdom in Europe; Brazil, Canada, Mexico and the United States in the Americas; China, Israel, Japan, Singapore and Sri Lanka in Asia; Australia and New Zealand in Oceania; and South Africa in Africa — plus other countries and regions worldwide, shipped from our base in Dongguan, China.

Contact: Felipe Iglesias, [email protected], +86 13126536955.

Have a drawing to audit against this checklist?

Email [email protected] or call +86 13126536955 — checklist, DFM review and quote in one pass.

Frequently Asked Questions

1. What is the supplier audit checklist for a machining factory?

In short, Request six documents before visiting: the machine list with model names and counts, calibration records, an SPC or CMM report from a real job, certificate numbers with registrar and scope, a sample PPAP or control plan, and a named owner of secondary operations. Then match each to the floor during a walkthrough.

2. What is the minimum order quantity for machining?

In short, The MOQ is 1 piece. Prototype and single-part orders are accepted alongside production runs, so you can audit a first article before committing to volume.

3. What tolerances can this machining factory hold?

In short, ±0.003 mm on CNC milling, ±0.002 mm on CNC turning, and ±0.002 mm for precision grinding. Critical dimensions are verified on in-house Hexagon CMMs, with process capability Ppk ≥ 1.67 at the initial study on key characteristics and Cpk ≥ 1.33 on general characteristics — backed by a measured Cpk = 1.851 (one characteristic on one part, not a blanket capability claim) on a real job.

4. Which materials does the factory machine?

In short, Aluminum, stainless steel, carbon and alloy steel, brass, copper, titanium, magnesium and engineering plastics including ABS, POM, nylon, PTFE and PEEK. Every incoming lot is XRF-checked against the mill certificate so the alloy you specify is the alloy you receive, not a near-match.

5. What are the lead times?

In short, Roughly 3, 7 or 30 days depending on part complexity and the number of process steps. Simple parts ship in about 3 days, while parts with surface finishing or many operations fall into the longer 30-day tier.

6. Are the certifications verifiable with the registrar?

Yes — ISO 9001:2015 (116024/A/0001/UK/En), IATF 16949:2016 (131941/A/0001/SM/En) and ISO 14001:2015 (116024/B/0001/UK/En), all issued by URS. IATF 16949 scope excludes product design under Clause 8.3, so this is a build-to-print operation.

7. How is incoming material verified?

In short, Every incoming lot is checked by XRF against its mill certificate before it reaches a machine, so mixed or mislabeled alloy is caught at the door. This prevents the most expensive defect in machining: a perfectly machined part made from the wrong material, which stays silent until it fails in your assembly.

8. Can parts be traced back to the raw material?

In short, Yes. The MES/ERP system records the full chain on every lot: raw material source and usage, process parameters, machine data, production batch, machining time, operator and inspection results.

9. Which machining services are run in-house?

In short, Four core processes: CNC milling (3-, 4- and 5-axis), CNC turning, mill-turn and precision grinding. Keeping the metal-cutting chain under one roof means one accountable supplier for the tolerance-critical work, with secondary finishing bundled through named, qualified partners.

10. What documentation ships with the parts?

In short, CMM inspection reports, SPC control charts and material certificates ship with the parts. Every critical dimension carries a measured value rather than a pass/fail flag, so your own incoming inspection has a documented baseline to check against — the same evidence you request before ordering is delivered with it.

11. Can secondary operations be bundled?

In short, Yes — anodizing, plating, powder coating, painting, brushing, polishing and heat treatment can be bundled so you receive finished parts, not machined blanks. In-house ovens reach 500 °C for aluminum and low-temperature steel stress relief; titanium stress relief above that is outsourced and stated as such.

12. How do I request a factory audit or walkthrough?

In short, Email [email protected] or call +86 13126536955. A live video walkthrough of the floor is available on request, and an in-person audit can be scheduled for buyers visiting southern China.

13. Which materials and industries do you cover?

In short, We machine aluminum, stainless steel, titanium, brass, copper, and Inconel, plus engineering plastics including PEEK and Delrin. These materials are used in medical, aerospace, automotive, robotics, electronics and defense applications, with the inspection, traceability and documentation each sector requires before it places an order.

What payment methods and terms do you accept?

PayPal, Western Union, and bank or wire transfer. For long-term customers we also accept Net 30, Net 45, and Net 60 terms after an approved credit review.

What happens if a machined part has a manufacturing defect?

We provide free repair or remake for parts with manufacturing defects. All repair and remake costs, including return and shipping, are on us.

How quickly do you respond to inquiries?

We respond to every inquiry within 24 hours. Quotations for standard parts are returned within 48 hours; print reviews and DFM feedback are usually back within one business day.

Standards referenced on this page

  • ASTM B211/B211M-19 — Standard Specification for Aluminum-Alloy Rolled or Cold Finished Bar, Rod, and Wire
  • ASTM B348/B348M-21 — Standard Specification for Titanium and Titanium Alloy Bars and Billets
  • ISO 9001 — Quality management systems — Requirements